Caraflo V200 Shower Instructions New! 【2025】

Reinstallation is the reverse: refit the body to the tails, tighten the grub screws (do not overtighten), reconnect the water supplies, and check all seals for leaks.

: Remove the small plugs (usually #8 in diagrams) to access fixing screws. Seal Fitting : Replace the Nitrile rubber O-rings on the wall-mounted brass tails. Lubrication : Lightly lubricate new seals with silicone grease The Shower Doctor Silicone Grease ) or mild soap before reassembly. The Shower Doctor Winter Protection (Crucial) Because the V200 is designed for holiday homes, it must be drained down or disconnected during winter to prevent internal damage. The Caravan Warehouse Freeze Warning

Before using the unit, ensure the following safety measures are observed to prevent injury or damage to the unit:

Turn on the shower and let the water run for 60 seconds until the maximum hot setting stabilizes. Place a digital thermometer under the stream. Calibrate the Dial: Place the control dial loosely back onto the spindle. caraflo v200 shower instructions

: Frozen residual water within a thermostatic cartridge will expand. This cracks the internal nylon casing or breaks the Vernet copper capsule. You must drain the system when closing your caravan for winter.

Tighten the union nuts onto the brass tails using an adjustable wrench. Protect the polished chrome finish by wrapping a soft cloth around the wrench jaws. Step 3: Temperature Adjustments & Calibration

Watch this brief guide on how a thermostatic mixer works to maintain consistent temperatures: Reinstallation is the reverse: refit the body to

The V200 is a mixer, not a thermostatic unit. Therefore, the temperature may fluctuate if water is used elsewhere in the vehicle. 4. Maintenance and Winterization To ensure longevity of your Caraflo V200 shower:

Apply a small bead of high-quality silicone sealant behind the plates to prevent moisture from penetrating the wall cavity. Step 3: Mounting the Valve Body

The Caraflo V200 features an intuitive dual-control system designed for ease of use in confined leisure vehicle spaces. Lubrication : Lightly lubricate new seals with silicone

The Caraflo V200 shower system is covered by a 2-year limited warranty. For more information, please refer to the warranty documentation provided with your purchase.

The is the industry-standard thermostatic shower mixer valve used across the UK and Europe for static caravans, touring holiday homes, and specialty modular shower pods. Introduced in 2013 to replace the legacy V100 model, this highly reliable, space-saving valve features ultra-compact 45mm hole centers and a robust brass core. It comes fully certified with NCC, WRAS, and TMV2 anti-scald safety standards.