Hisilicon Kirin 710 Flash Tool File

Wait for the tool to display "Done" or "Passed" before disconnecting. Common Issues & Solutions

The first boot may take up to 10 minutes as the system rebuilds the cache partitions. Troubleshooting Common Flashing Errors

Because a bricked device cannot boot into standard Fastboot mode, you must force it into Factory Mode (USB COM 1.0): Power off the phone and carefully remove the back cover. Locate the specific testpoint pin on the motherboard.

If your device is completely unresponsive, you will need to use a tool that supports Huawei USB COM 1.0 (such as IDT, EFT Pro, or SigmaKey) alongside a factory board firmware package. Step 1: Locate and Trigger the Test Point Power off the phone completely. hisilicon kirin 710 flash tool

If you own a Huawei or Honor device from the 2018–2020 era, it is likely powered by the (or 710F/710A) chipset. This 12nm FinFET processor was a staple for mid-range devices like the Huawei P30 Lite, Mate 20 Lite, and Honor 9X.

Create a folder named dload in the root directory of the storage drive.

: Direct FRP erasure, unlocking bootloaders via Testpoint, and unbricking bootloops. Wait for the tool to display "Done" or

The Hisilicon Kirin 710 is a resilient chip, but its security is robust. The correct flash tool is out there, but you must respect the hardware protocols. Always backup your data and triple-check your firmware version.

Huawei/Honor devices with Kirin 710 use:

: Supports writing firmware in multiple modes, including Upgrade Mode , Fastboot Mode , and BROM Mode . It also features a secure method for writing BOARD firmware to prevent losing IMEI data. Locate the specific testpoint pin on the motherboard

Ensure your phone has at least 50% battery capacity to avoid sudden power-offs during the flashing process.

Verify that the correct COM port number matches the one shown in your Device Manager. Click the or Flash button.

Extract your downloaded official stock firmware and move the UPDATE.APP file (along with any region-specific zip files) into the dload folder. Insert the SD card/OTG into your phone.