Keyence Gs-11pc Manual Jun 2026

The product is not explosion-proof.

The is a highly durable, non-contact safety interlocking switch designed to ensure the safety of personnel operating machinery . As part of the GS Series, the GS-11PC provides reliable, high-performance monitoring for safety doors and guards, preventing unauthorized access to hazardous areas while machines are active.

Fix the GS-11PC sensor to the stationary frame of the machine.

: EDM (External Device Monitoring) or Reset input. keyence gs-11pc manual

is a non-contact safety switch, proper mechanical alignment between the sensor main unit and the actuator target is necessary to avoid intermittent faults. The system features high misalignment tolerances, but must be mounted within specific distance thresholds. Saocap S sub a o end-sub →right arrow

Before installing the GS-11PC, review its electrical and physical specifications to ensure compatibility with your system environment. Specification Type Cable Type (PNP Output) Cable Length 5 meters (standard variant) Safety Outputs 2 x PNP semiconductor outputs (OSSD 1 & OSSD 2) Auxiliary Output 1 x PNP non-safety output (for PLC monitoring) Response Time Turn OFF: 15 ms / Turn ON: 100 ms Assured Operating Distance (Sao) 5 mm to 10 mm (depending on direction of approach) Assured Release Distance (Sar) 15 mm to 22 mm Supply Voltage 24 VDC ±10% (Class 2) Current Consumption Max 50 mA (excluding load current) Enclosure Rating IP65 / IP67 / IP69K (IEC 60529) Safety Standards ISO 13849-1 (PL e, Cat 4), IEC 61508 (SIL 3) 3. Wiring and Pin Configuration

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. The product is not explosion-proof

Are you planning to together?

. Because this is a specialized industrial safety component, the full manual is typically found on the official Keyence support portal rather than as a public blog post or social media post. Official Documentation Links GS Series Instruction Manual (Official Keyence)

The switch is in an interlock state or waiting for a manual reset command. Fix the GS-11PC sensor to the stationary frame

Internal spring wear or contamination. The manual specifies a maintenance cycle: apply a drop of Keyence S-04 (light machine oil) to the spindle shaft every 100,000 cycles. Do not use WD-40.

The Complete Guide to the Keyence GS-11PC Safety Interlock Switch