Kincaid Radio Controlled Clock Instruction Manual -

Your clock is synchronized by a radio signal broadcast from:

Press and hold the WAVE or RCC button for 3 seconds. The signal icon will start flashing immediately.

Before diving into the setup, it helps to understand how your clock operates.

It never finds the signal. Solution: Radio waves hate metal and concrete. kincaid radio controlled clock instruction manual

The hour digits will begin to flash. Use the UP/DOWN or ADJUST buttons to change the hour. Press SET again to move to minutes, year, month, and date.

Battery-powered models continue running. AC-powered models without battery backup will reset and resync when power is restored.

Once the signal is successfully captured, the hands will fast-forward to the correct local time, or the digital display will stabilize. Section 3: Manual Settings and Adjustments Your clock is synchronized by a radio signal

Practical items:

Concise Quick-Start steps:

Every Kincaid clock exhibits a phenomenon we call the Listening Silence. Upon battery insertion, the clock will point to 4:00, 8:00, or 12:00—regardless of the actual hour. It will then freeze for up to 12 minutes. Owners often report a faint, low-frequency hum during this period. It never finds the signal

If the radio signal fails (solar flares, government maintenance, or the rare “leap second” hangover), you can set the time by hand.

Avoid placing the clock in direct sunlight, near heating vents, or close to drafty air conditioners. The internal thermometer requires stable ambient room air to measure temperature accurately. 6. Product Care and Maintenance

I can provide highly customized setup steps or direct you to the exact button layout for your specific device. Share public link

Yes – once synced, it is accurate to within one second per million years (the same accuracy as an atomic clock).