Onkyo Rc-799m Remote Manual ((new)) Jun 2026

: The Remote Indicator (or the button itself) should light up or flash to show it is ready for input. Input the Code

Use the keys to adjust the secondary room volume independent of your living room. 🔄 How to Reset the RC-799M to Factory Default

Accesses on-screen display menus for rapid audio and video calibration. 💻 How to Program the Onkyo RC-799M Remote

Point the remote at the device and press to test if it turns off. Method B: Searching for Codes Automatically onkyo rc-799m remote manual

Press the RCV button first. If the remote was accidentally switched to "TV" or "BD/DVD" mode, it will try to send commands to those devices instead of the receiver.

: Cycles through audio profiles like Movie/TV, Music, and Game. 🔄 Resetting the Remote to Factory Defaults

Release both buttons, then press the button one more time. : The Remote Indicator (or the button itself)

Hold down the button and press/hold the HOME button simultaneously.

Hold down the button (e.g., TV, DVD) you wish to program while simultaneously holding the DISPLAY button for about 3 seconds. Wait for the REMOTE MODE button to light up.

If the code is accepted, the indicator light will flash twice. If it flashes once long or incorrectly, repeat the process with a different code. 💻 How to Program the Onkyo RC-799M Remote

The Onkyo RC-799M remote control has a standard layout with a sleek and ergonomic design. The remote has a total of 55 buttons, which are divided into several sections:

Power on the device you want to program (e.g., your TV).

Enter the using the number pad within 30 seconds.