The software should immediately detect the bootloader of the meter, and a progress bar will appear on your PC screen indicating that data transmission has started. Step 4: The Flashing Process
: Plug the cable into your PC and the WS-6906. Note: Windows may not show a "New Hardware" pop-up immediately; this is normal.
Alternatively, you can manually add new satellites or transponders directly through the meter’s on-screen menu by navigating to the
Click and select your downloaded Satlink WS-6906 firmware file. Step 4: Flash the Firmware satlink ws-6906 software upgrade
Connect the RS-232 cable to the finder and your computer’s motherboard or USB port. Initialize Software: SatlinkTools
Select the appropriate COM port (e.g., COM1, COM3). You can verify this in the Windows Device Manager under "Ports (COM & LPT)". Bitrate/Baudrate: Typically set to 115200 . Mode: Select Upgrade . 4. Load the Firmware File
Instantly updates pre-loaded satellite lists and frequencies. The software should immediately detect the bootloader of
After a successful upgrade, it is highly recommended to perform a through the meter's built-in system menu. This clears old cache data and prevents configuration conflicts.
: Some websites provide updated channel lists (.bin files) for WS-6906 that can be loaded via RS232 using loader software like "Upgrade By RBS".
You will need a serial RS-232 to USB cable (or a native serial cable) to connect the meter to a PC. Alternatively, you can manually add new satellites or
The Satlink WS-6906 is a classic, reliable satellite signal meter used by technicians and DIY enthusiasts globally. Keeping its firmware updated ensures optimal performance, accurate transponder data, and a bug-free interface.
: Ensure the battery is charged to at least 70% or connect it to the wall charger during the update.
Set the download type to or Software (depending on the tool version).
Upgrades often fix known bugs, improving the speed and accuracy of the signal lock.