Zm7205a Manual [better] Jun 2026

: Controls rotation direction. Connecting to GND1 reverses the motor (CCW); leaving it open or connected to +5V1 results in forward rotation (CW).

Enable Signal (Stop/Run) – Connect to COM to stop, disconnect to run (or via switch).

If your motor has sensors, connect them to +5V2, GND2, HU, HV, and HW . Speed Control: zm7205a manual

如需外接转速表进行速度显示，可按以下步骤操作：

Capable of driving motors up to 20,000 RPM (depending on the motor). Dimensions: Approximately 150mm x 97.5mm x 53mm. Cooling: Utilizes both natural and forced air cooling. Key Features & Operational Modes : Controls rotation direction

Live → Terminal 1 → Terminal 4 → Terminal 3 → Heater → Neutral.

Connect your AC source to the AC1 and AC2 terminals. If your motor has sensors, connect them to

Three-phase BLDC motors with or without Hall sensors. Maximum Speed: Up to 20,000 RPM (depending on the motor).

ZM-7205A 出厂默认设置为 。用户可通过上位机电脑软件或手持调试器（需另购）进行以下模式设置：

Full technical documentation can be found through the following providers: